Filter
Top Products
GBGB42
You can enjoy not only scrambled services using the Conditional
Access Modules (CAM), but also Free-To-Air services.
This product currently supports any kinds of CAM (Viaccess
TM
,
Nagravision, Conax, CryptoWorks(TM), Irdeto, Mediaguard, and
so on). Common Interface module and Smart Card depending on
the service provider. If you need CAM, contact your service
provider of distributor.
If CAM is not being used, then the only available service is
Free-To-Air services.
The Status window shows the H/W version, S/W version and
loader version of your STB. Moreover, it shows the information
about tuning the current channel, the quality and level of signal
(Tuners A and B) so that you can set antennas early.
To exit this window, press the EXIT button.
1. Select Default using the buttons and press the OK button.
The PIN code Input window will appear.
2. When you enter a PIN code, the message, "The brings your
current channel as well as menu setting back to default values."
will be prompted.
3. Select OK and press the OK button to save all services as
Free-To-Air service of ASTRA1. (Factory default mode)
4. Select EXIT to cancel the operation and to exit the menu.
Select the OSD Transparency and Information Box Display Time.
Select the OSD Transparent type. It affects Information box,
Soundtrack, Subtitle, Service list, Time and Simple EPG mode of
TV Guide. Use the buttons to toggle transparent and opaque.
Set the display duration of Information box displayed on the
screen after changing services. The time ranges from 0 to 20
seconds.
1. Move the cursor to Info. Box Display Time.
2. Select Duration time using the buttons.
Status
Common Interface
Default
Other Setting
OSD Transparency
Info. Box Display Time
PVR-8000 ENG 1/21/03 11:10 PM Page 47