Filter
Top Products
**
This will guide you through the installation procedure and will perform an channel search
automatically. (Installation Wizard will also run after the receiver has been returned to Default
Settings.)
**
Search
**
Please wait until the channel search is complete.
1. During the channel search, the cursor is located at Stop.
Therefore, if you press the OK
button during
searching, the operation is stopped and the channels
found until then will be displayed.
2. Even if the search does not find any channels, press the
OK
button and try to reset the search operation again
if necessary.
3. You can delete unwanted channels from the found
channels. Select your desired channels to delete and press
the OK
button. Then select Delete and press the OK
button. To delete all channels, select Select All to
select all channels, select Delete, and press the OK
button.
4. After completing the Channel Search and deleting
unwanted channels, select Save to save the changes.
Warning: If you exit the Install Wizard without fully completing the channel searching procedures,
you many not receive all the channels available. In this case, you can use the
Installation Menu to configure your receiver as you like.
**
3. Installation Wizard
GB 15
**
**
**
**
**
**
**
**
**
**
**
**
**
**