Humax PVR-8000T DVR User Manual


 
**
5.3 Rewind to Previous Scene
Press the REWIND button on the remote controller to watch
the scene passed by. Whenever you press the REWIND
button, the rewind speed increases by 3 steps.If you press the
PLAY
button, the rewinding operation stops, and the
programme will play at normal speed.
Note: You can rewind to the point when you have changed to
the current channel. If the watching point reaches the
start point during rewinding, the programme will begin to
play at normal speed from the point.
5.4 Fast Forward to the Next Scene
Press the FORWARD button on the remote controller to fast
forward the programme. Whenever you press the FORWARD
button, the speed increases by 3 steps. If you press the
PLAY
button, the fast forward operation is stops, and the
programme will play at normal speed.
Note:
You can use the fast forward operation only when there is a time difference between the current
watching and the broadcasting point caused by some previous operations such as pause, slow
motion, or rewind. You can fast forward up to the current broadcasting point. If the watching point
reaches to the broadcasting point, the programme will play at normal speed.
5.5 Recording
Press the REC button on the remote controller to start recording the current programme. While
the time shift operation records the programme temporarily, record operation records the programme
permanently so you can playback the recorded programme at any time. For more information about
recording, refer to Chapter 6.
5.6 Additional Time Shift Operations Using Time Bar
You can perform additional time shift operations using the 5 operation buttons on the right side of the
time bar.
**
5. Time Shifted Recording
GB 23
**
**
**
**
**
**
**
**
**
**
**
**
**
**