Filter
Top Products
Flash BIOS
Please do the following to update BIOS.
To update BIOS:
1. Create the diskette image by the following command:
LOADDSKF 1FUDxxUS.DSK A:
Note: XX: Translate to appropriate number.
2. Boot from the diskette. (Please make sure already
attach AC and Battery)
3. When completed, the system is automatically turned
off.
4. Make sure there is no diskette in the diskette drive,
then turn on the computer.
5. PressF1 key into BIOS setup Utility during the boot
time.
Note: ″Press F1 for IBM BIOS Setup Utility″ message
is displayed at the lower-left area of the screen.
6. Press the F9 key to load default configuration.
7. Select Yes.
8. Press the F10 key to save default configuration.
9. Select Yes. The system will restart automatically.
MT 2656, 2657, 2676
33