IBM R30 CRT Television User Manual


 
Symptom-to-FRU Index
The Symptom-to-FRU Index lists the symptoms and errors
and the possible causes. The most likely cause is listed
first.
Note: Perform the FRU replacement or actions in the
sequence shown in the FRU/Action columns. If a
FRU does not solve the problem, put the original
part back in the computer. Do not replace a
non-defective FRU.
This index can also be used to help you decide which
FRUs should be available when servicing a computer.
Numeric error codes show the errors detected in POST or
system operation (runtime). In the following error codes, X
can be any number.
If no codes are available, use narrative symptoms.
If the symptom, is not listed, go to Undetermined
Problemson page 49.
Note: For any IBM device not supported by the diagnostic
codes in this ThinkPad computer, see the manual
for that device.
Numeric Error Codes and Messages
Error
Code
Message Meanings Comment
0200 Failure Fixed
Disk
Fixed disk is not
working or not
configured
properly. Check
to see if fixed
disk is attached
properly. Run
setup. Find out if
the fixed-disk
type is correctly
identified.
Check whether
fixed disk is
attached
properly (e.g.
cable, jumper,
power,..). Enter
Setup to check if
the fixed disk
type is correctly
identified.
010 Memory Error
at mmmm:
nnnn
Extended
memory not
working or not
configured
properly at offset
nnnn,
Change memory
module.
40 ThinkPad R30/R31 HMM