Filter
Top Products
OPERATOR’S MANUAL
613201-2 -C
RELEASED: 12-13 -83
REVISED: 5-13-10
(REV. D)
INCLUDING INSTALLATION & OPERATION
613201-2-C Tire Fill System
Utilizing th e Aro 1” Metallic Diaphragm Pump
(1:1 Ratio - Calcium Chloride Compatible)
ALSO INCLUDE MANUALS 66610X-X-C (97999-100) & 67144 (97999-953)
READ THIS MANUAL CAREFULLY BEFORE INSTALLING,
OPERATING OR SERVICING THIS EQUIPMENT.
It is the responsibility of the employer to place this information in the hands of the operator. Keep for future reference.
SERVICE KITS
Use only genuine AROR replacement parts to assure compatible
pressure rating and longest service life.
637118-C for Diaphragm Pump Air Section repair.
637119-41-C for Diaphragm Pump Fluid Section repair.
GENERAL DESCRIPTION
Operator’s Manual 66610X-X-C should be used for General Informa-
tion, Installation, Operation, and Maintenance.
This pump system has been designed for the purpose of evacuating
and filling tires with calcium chloride ballast solution.
It utilizes the 67144 1” M etallic Diaphragm Pump which features an
Aluminum body and fluid manifolds, neoprene diaphragms and PTFE
balls for pumping the corrosive calcium chloride ballast solution. The
diaphragm pump has a 1:1 ratio which means the fluid outlet pressure
will beapproximately equalto the available airinlet pressure.Although
the pump is capable of high volume delivery (upwards of 25 GPM at
100 PSI) filling and evacuating times will take longer due to the small
restricting diameter of the tire valve.
INSTALLATION - SET UP
The operator should make cer tain adequate air supply is available to
the pump, be cautious of long air lines, restr ictions or other effects on
the air inlet pressure.
Assemble thehose /strainerand gunassembly tothe pump(see figure
3) as shown. Be certain hoses are connected to proper sides of the si-
phon valve.
FIGURE 1
613201-2-C TIRE FILL SYSTEM
Screened Inlet
Supply Hose
Dispensing Hose
Gun
67144
Diaphragm Pump
Control Valve
SAFETY PRECAUTIONS
Z Read and heed all W arnings, Cautions, and Safety Precau-
tions before operating this pump.
W ARNING DO NOT EXCEED MAXIMUM INLET AIR PRES-
SURE OF120 PSI(8 BAR). Operating pump at higherpressure
can cause pump damage.
W ARNING HAZARDOUS PRESSURE. Can result inserious
injury or property damage. Do not service or clean pump,
hoses or dispensing valve while the system is pressurized.
CAUTION Be certain all operators of this equipment have
been trained forsafe workingpractices, understand it’slimita-
tions, and wear safety goggles / equipment when require d.
INGERSOLL RAND COMPANY LTD
209 NORTH MAIN STREET – BRYAN, OHIO 43506
(800) 495-0276 FAX (800) 892-6276
© 2010
www.ingersollrandproducts.com
CCN 81380057