Insignia NS-32D201NA14 Flat Panel Television User Manual


  Open as PDF
of 2
 
QUICK SETUP
GUIDE
32" LED TV
NS-32D201NA14
Included accessories
Which cables do you have?
Your TV has several dierent jacks for connecting devices. For the
best video quality, use the best available connection. Use the cables
that came with your devices.
Note: You can use the HDMI 1 (DVI+ARC) jack to connect a DVI device to your TV. Attach
an HDMI-to-DVI adapter to the end of the HDMI cable. The adapter connects to the DVI
device’s jack. See your online User Guide for more information about dierent types of
HDMI (ARC , DVI or MHL).
Note: Images do not necessarily represent the exact design of your television.
Thank you
for purchasing this state-of-the-art
Insignia television. We hope you enjoy
the quality and reliability of this
television for years to come.
FIND YOUR
USER GUIDE ONLINE!
We are going green so a copy of your
User Guide is not provided in the box
but is available online.
Go to www.insigniaproducts.com,
then click Support & Service. Enter your
model number in the box under Manual,
Firmware, Drivers & Product Information,
then click .
Features
Front view
Back view
OVER
VIDEO QUALITY
BEST
BETTER
GOOD
GOOD
HDMI video/audio
Component video and analog audio
Composite video and analog audio
Coaxial video/audio
JACK TYPE CABLE CONNECTOR
STOP!
Do not plug your
power cord in until all
other devices have
been connected.
Multi-purpose jacks: You can plug any
device that uses HDMI into either HDMI
jack. However, certain devices must be
connected to the DVI+ARC or MHL jack.
See the instructions that came with your
ARC, DVI, or MHL-enabled device for
more information.
Note: The HDMI1(DVI+ARC) jack is a
shared jack. This means that you can
connect only one ARC or DVI device at a
time.
Note: The component video and AV
jacks are shared. This means you can
connect only one component video or
AV device at a time. We suggest using
HDMI if your device supports it.
Using component cables (BETTER)
- OR -
Using an AV cable
(GOOD)
Component cable option
AV cable option
MAKING CONNECTIONS
How do I watch TV (cable or satellite receiver) or connect a device such as a DVD or
Blu-ray Disc player, game console, or camcorder?
- OR -
How do I prepare my TV for wall mounting?
(not for use with a TV stand)
• Carefully place your TV face-down on a cushioned, clean surface to protect the screen from damages
and scratches. See the instructions that came with your wall mount for more information
about how to correctly mount your TV.
START HERE
How do I attach the stand to my TV?
(not for wall mounting)
You’ll need: A Phillips screwdriver and a soft surface to lay the TV on.
A Carefully place your TV face-down on a cushioned, clean surface
to protect the screen from damages and scratches.
B Secure the stand column to the TV using the three provided T4 12 mm screws.
(These are the short screws.)
C Secure the TV stand to the stand column with the provided T4 14 mm screw.
(This is the long screw.)
Remote control
and two AAA batteries
Stand column
Before using your new product, please read these instructions to prevent any damage.
TV stand
Power indicator
Remote control sensor
How do I connect my TV to an antenna or cable wall jack?
Using an HDMI cable (BEST)
TV stand
A
T4 (12 mm) screws
T4 (14 mm) screw
T4 screws (12 mm length) (3 pcs.)
T4 screw (14 mm length) (1 pc.)
Note: Connect the yellow video cable
connector to the green Y/VIDEO jack
on the back of your TV.
Front
TM