Filter
Top Products
15
www.insigniaproducts.com
Navigating the menus
Selecting a channel
To select a channel:
• Press CH or CH to go to the next or
previous channel on the memorized channel
list.
• Press the number buttons to enter the analog
or digital (main) channel number you want,
then wait for the channel to change, or press
ENTER to change the channel immediately.
• To select a digital sub-channel, press the
number buttons to select the main digital
channel, then press to select the
sub-channel. Wait for the channel to change,
or press ENTER to change the channel
immediately.
• Press RECALL to go to the last channel
viewed.
• Press CH.LIST to display a list of memorized
channels, press CH or CH to highlight the
channel you want from the list, then press
ENTER or VOL to go to that channel.
• Press FAVORITE to display a list of your saved
favorite channels, press CH or CH to
highlight the channel you want from the list,
then press ENTER or VOL to go to that
channel.
Digital sub-channels
A digital TV signal transmits more data than an
analog signal. This increase in data provides a
better picture and sound with less static and
interference. The increased data capacity also lets
broadcasters fit several channels into the same
bandwidth as an analog signal.
Broadcasters may use these sub-channels to
transmit a variety of information, such as weather
forecasts, foreign languages, and commercials. A
digital sub-channel is indicated by the main
channel number, followed by a dot, then the
sub-channel number. For example, 5.1 indicates
sub-channel 1 of main channel 5.
Adjusting the volume
To adjust the volume:
• Press VOL or VOL to decrease or increase
the volume.
• Press MUTE to turn off the sound. Press MUTE
again to turn the sound back on. Pressing
MUTE does not affect the sound played
through headphones.
Displaying additional information
To display additional information:
•Press INFO to show an information banner.
The information banner shows current
program information such as channel number,
video input source, and resolution.
• Digital mode information—Displays
channel number, channel label (if preset),
broadcast program name, TV rating, signal
type, audio information, resolution, current
time, and current program start and end
times.
• Analog mode information—Displays
channel number, channel label (if preset),
signal type, audio information, and TV
rating.
• Press GUIDE to open the electronic program
guide.
Note
You can press the number buttons to go to a channel
that was skipped in the channel scanning.
Press to open the menu.
Press to select menus items. In
some menus, press CH to go to
the previous menu.
Press to select menus, adjust
selected items, or move the
on-screen cursor left or right.
Press to confirm your selections or
enter a sub-menu.
Press to return to the previous
screen.
Press to close the menu.
# Description
Channel number
Channel name
Program name
TV rating
Program description, if available
Closed caption style
Program date
Program time
Program Name
2.1 WGBH-SD
TV-Rating TV-14 CS
No Program Info
Prev. 3-9 2010 1 1:00AM-12:00PM Next
1
2
3
4
5
6
7
8