Filter
Top Products
11
Insignia NS-PDP32-09 32" PDP TV
www.insignia-products.com
Connecting a digital cable TV box or satellite
receiver
To connect a digital cable TV box or satellite
receiver:
1 Plug component video cables (green = Y,
blue = Pb, and red = Pr) into the component
out jacks of the cable TV box or satellite
receiver, then into the YPbPr1 IN or
YPbPr2 IN jacks on the back of your TV.
2 Plug RCA audio cables into the audio output
jacks of the cable TV box or satellite receiver,
then into the YPbPr1 IN or YPbPr2 IN
AUDIO L (white) and AUDIO R (red) jacks on
the back of your TV.
3 Press to turn on your TV.
4 Press INPUT, press or to select
YPbPr1 or YPbPr2, then press ENTER to
confirm.
Connecting AV equipment with an HDMI cable
To connect AV equipment with an HDMI
cable:
1 Plug an HDMI cable into the HDMI out jack of
the AV equipment, then into the HDMI1 IN or
HDMI2 IN jacks on the back of your TV, or the
HDMI3 IN jack on the side of your TV.
2 Press to turn on your TV.
3 Press INPUT, press or to select HDMI1
or HDMI2 (rear), or HDMI3 (side), then press
ENTER to confirm.
Connecting AV equipment with a DVI connector
This connection can be used to connect a digital
video source, such as a PC, digital-capable
DVD, or digital set-top box, to your TV.
Back of TV
Component cable
Audio cable
TV cable box
Satellite
receiver
Note
The HDMI cable provides both video and audio
signals, so it is not necessary to connect
additional audio cables for sound.
Back of TV
Side of TV
AV equipment
DVI output
Back of TV
Side of TV
AV equipment
Audio cable
DVI-to-HDMI
cable
08-1143 NS-PDP32-09 - ENG.fm Page 11 Friday, May 2, 2008 10:28 AM