Jasco RM24906 Universal Remote User Manual


  Open as PDF
of 16
 
9
Using Your Remote
Code Identication
TheCodeIdenticationFeatureallowsyouto
identify the 4 digit library code stored under your
devicebutton.Forexample,ifyouwanttondout
what 4 digit code is stored under your TV device
button, follow the six steps below:
1. Press and hold the
CODE SEARCH
button until the red indicator stays on.
Release the CODE SEARCH button.
2. Press and release the desired
device button (TV, VCR, etc.). The
red indicator blinks, then stays lit.
3. Press and release the
CODE SEARCH
button. The red indicator blinks once
and remains lit.
4. Tondtherstdigit
for the code stored
under the device
button pressed in step
2, press each numeric
button from 0-9 in
turn. The number that
causes the indicator
lighttoblinkistherst
digit in your code.
5. Tondtheseconddigit,repeatstep4,this
time when the red indicator blinks off this is the
second digit.
6. Repeatstep4tondthethirdandfourthdigits.
 previous next