Jensen ANHD20RTL12 TV Antenna User Manual


  Open as PDF
of 2
 
ANHD20RTL12 INSTALLATION guIde
Crank existing antenna to full elevation.
Remove 3/32” set screw from crank. Remove crank,
spring, directional handle, & 4 screws.
1
2
• DrillorBatteryDriverwitha#2Philipsbit
• PuttyKnife
• 3/32”Allenwrench
• ElectricalTape
• ExteriorRoofSealant(Non-hardeningtype)
TOOLS & SUPPLIES
1
2
3
4
5
Remove sealant & screws from base,
remove antenna and clean surface
3
Apply sealant to all holes & attach exterior plate
using the included hardware
4
www.JensenRVDirect.com