Filter
Top Products
Sound Adjust
MTS STEREO SAP MONO
Many broadcasts today contain more than one audio signal. In addition to stereo and mono
soundtracks, some broadcasts also contain a second soundtrack in a different language. Use
MTS to select the audio signal you wish to listen to.
• Select STEREO for your normal listening needs. With this setting programs broadcast in
stereo will be played by the TV in stereo. Programs broadcast in mono sound only will be
played in mono sound.
• Select MONO if you are receiving a weak signal. Mono sound will usually give clearer sound
from weak signals than will stereo. With this setting all broadcasts, mono and stereo, will be
played in mono sound only by the television.
• Select SAP (Second Audio Program) to listen to an alternate soundtrack (if one is being
broadcast). Alternate soundtracks may be the dialog of a program in a different language or
additional information about a program topic. A logo will appear at the beginning of a
program with SAP to inform you that an alternate soundtrack is available.
Sound Adjust - Continued
Some Sound Advice
You can tell if a program is broadcast in stereo by the position of the ON AIR arrow in the
MTS menu. Unfortunately, some cable companies may “squash” the transmission of stereo
programs because they have only monaural equipment. If you are connected to a cable
system, the sound is at the mercy of that cable company. If they broadcast only monaural
signals, your television will only receive a mono signal even if the program was originally
broadcast in stereo.
Fortunately, most programs that are broadcast in stereo are aired on the major television
networks. If you connect your TV to an antenna instead of cable, and set the tuner mode in
the AUTO TUNER SETUP to “AIR” instead of “CABLE” you will be able to pick up stereo
broadcasts in stereo.
SOUND ADJUST
TREBLE
BALANCE
MTS SAP
MONO
BASS
NEXT PAGE
PREVIOUS
OPERATE BY
EXIT BYSELECT BY
EXIT
STEREO
ON AIR ON AIR
46