Filter
Top Products
Page 5-11
1. Press the Mode button until the remote is in
the SAT mode.
2. Press the
Menu button to open the
Main Menu.
3. Select the
VCR Setup option.
4. Press the arrow buttons to move the
highlight to
Video stabilizer in the
Options list.
5. Press the
Select button to place a
checkmark in the checkbox next to
Video stabilizer. Pressing the Select
button again will remove the checkmark.
6. Press the arrow buttons to move the
highlight to
Save.
7. Press the
Select button to save all
changes.
VCR Features
Playback Features
5
VIDEO STABILIZER
Only with: Playback of analog recorded tapes.
You can correct vertical vibration when playing back unstable EP recordings that were made
on another VCR. To turn this function on for automatic correction of vertical vibration, do
the following:
Remote
Menu Options
Buttons
MENU
MODE
8 VCR Setup
8
SELECT
Video stabilizer
SELECT
Save
Notes:
ࡗ Video Stabilizer does not operate during recording, during special effects playback,
during playback of a recording made at SP speed, and during playback of a bit stream
recorded D-VHS tape.
ࡗ When you finish viewing the tape, be sure to turn this function back off.
ࡗ Turning the VCR's power on or inserting a cassette into the recorder will automatically
turn this function off.