Filter
Top Products
Page 5-20
User and
Installation Guide
USING CALLER ID
Your system can display caller identification: the name and telephone number of the caller
for your incoming telephone calls. However, caller ID only displays information your
telephone company provides. You may not get all caller IDs, and some callers may block
caller ID. To set up your system to use caller ID, do the following:
If you want to activate this feature, you must call your local telephone com-
pany and subscribe to the caller ID service. Caller ID operates only when both
the recorder and your TV are turned ON and your recorder is connected to an
active telephone connection.
Some telephone calls will not show the caller name and telephone number.
The caller may have blocked Caller ID, or the call may be from an area that
does not have the technology.
1. Press the Mode button until the remote is in
SAT mode.
2. Press the
Menu button to open the
Main Menu.
3. Select the
System Setup option.
4. Select the
Preferences option.
5. Select the
Caller ID option.
6. Press the
Left arrow button to move the
highlight to the
Enable Caller ID option.
7. Press the
Up or Down arrow button to
select the
Enable Caller ID or the
Disable Caller ID option.
Remote
Menu Options
Buttons
T
H
E
M
E
MENU
MODE
6 System Setup
6
5
5 Preferences
5
5 Caller ID
Enable Caller ID
Disable Caller ID