Filter
Top Products
Page 5-32
User and
Installation Guide
8. Select the Create Timer option to save the
event timer, and press the
Select button.
9. Press the
Power button to turn the
recorder off. The TIMER light on the
recorder's front panel will illuminate.
SELECT
REVIEWING EVENT TIMERS
You can display a list of scheduled event timers at any time, using the Event Timer
Management menu. Or, use this menu to delete event timers. To open the Event Timer
Management menu, do the following:
Remote
Menu Options
Buttons
1. Press the Mode button until the remote is in
SAT mode.
2. Press the
Menu button to open the
Main Menu.
3. Select the
Timers option.
MENU
MODE
7
RESTRICTED PROGRAMS AND EVENT TIMERS
You must enter the system password before you can create a timer for a locked program, and
order a pay per view program before you can create a timer for it. If you do not, or if the
program is blacked out in your area, when the timer executes the recorder may display an
error message instead of the program.
POWER OFF AND EVENT TIMERS
If your recorder is OFF at the time an Auto-Tune or VCR Event Timer is scheduled to execute,
the timer turns the recorder ON. Once the event has ended, your recorder powers OFF (unless
you pressed any remote or recorder buttons during the time that the timer was active).
If your recorder is OFF at the time a Reminder Event Timer is scheduled to execute, the
timer turns the recorder ON and tunes it to the channel you last viewed. The recorder then
briefly displays the reminder screen.
7 Timers
POWER
Create Timer