Filter
Top Products
Page 6-4
User and
Installation Guide
COMPONENTS OF THE SATELLITE ANTENNA
Note: The following pictures are not to scale.
The fully assembled satellite antenna looks like this.
Following are descriptions of each piece of the satellite
antenna.
LNBF (LOW NOISE BLOCK DOWNCONVERTER WITH INTEGRATED FEEDHORN)
The "dish" focuses the signals transmitted from the satellites onto the LNBF. The LNBF
amplifies the signals, converts the whole "block," or range of signals to a lower frequency,
and "feeds" the signals into the coaxial cable(s) connected to your recorder(s).
LNBF - SINGLE OUTPUT
If you purchased the single-output LNBF to use with the
recorder, your package contains this LNBF. Note that this
LNBF has only one coaxial cable connection.
LNBF - DUAL OUTPUT
The dual output LNBF supplied with the HM-DSR100DU and
be used with more than one receiver. Note that this LNBF has
two coaxial cable connections.
LNBF SUPPORT ARM
The LNBF support arm attaches the LNBF and the dish to the
mast assembly.