Filter
Top Products
11
Preparation
Connecting an Antenna
Connecting an Antenna
or Cab
or Cab
le
le
TV
TV
aa
Antenna:
Disconnect the antenna from the rear of the TV and
identify the antenna cable. If it is a round 75 ohm
coaxial cable connect it directly to the jack marked
ANT.IN on your DVD+VCR. If your antenna cable is
flat connect it to a 300-ohm to 75-ohm antenna
adaptor (not supplied) and slip the adaptor over the
ANT.IN jack. Don’t attempt to screw it into to the
DVD+VCR.
bb
Cable TV:
If your cable connection has no converter or
descrambler, unscrew the cable from your TV and
attach it to the ANT.IN jack on the DVD+VCR.
If a converter is required connect a coaxial cable from
the wall jack to the IN connector on the converter,
and a coaxial cable from the OUT connector on the
converter to the ANT IN on your DVD+VCR. This
cable hookup permits both TV and DVD+VCR
operation.
To view or record a CATV channel when
using cable box
1Tune the TV to the DVD+VCR output channel
(CH 3 or 4).
2 Set the DVD+VCR channel selector to the cable
output channel. (Example: CH3)
3 Select a channel using the cable converter.
Notes:
• With this connection, you cannot record one program
while viewing another.
• If you are using a cable box to tune channels, it is not
necessary to do Auto Channel Set.
Basic
Basic
TV Connections
TV Connections
Make one of the following connections, depending on
the capabilities of your TV.
Rear of DVD+VCR
Antenna Antenna
OR OR
Rear of DVD+VCR
L
R
AUDIO INPUT
VIDEO
INPUT
ANTENNA
INPUT
Rear of TV
A1
VR
Y
Pb
Pr
COMPONENT/PROGRESSIVE SCAN
VIDEO INPUT
L
R
AUDIO INPUT
Rear of TV
A2
C