18
OTHERS
PBC
Set Playback Control (PBC) to On or Off.
On: Video CDs with PBC are played according to
the PBC.
Off: Video CDs with PBC are played the same way
as Audio CDs.
Auto Play
You can set up the DVD+VCR so a DVD disc auto-
matically starts playing whenever the DVD is inserted.
If Auto Play mode is set to On, this DVD player will
search for title that has the longest playback time and
then play back the title automatically.
On: Auto Play function is active.
Off: Auto Play function is not active.
Note:
The Auto Play function may not work for some DVDs.
B.L.E. (Black Level Expansion)
To select the black level of playback pictures. Set your
preference and monitor’s ability.
On: Expanded grey scale. (0 IRE cut off)
Off: Standard grey scale. (7.5 IRE cut off)
Remote Control Function
Remote Control A/B/C Code
Switching
The remote control is capable of controlling three
JVC video units independently. Each of the units
can respond to one of three codes (A, B or C). The
remote control is preset to send C code signals
because your unit is initially set to respond to C code
signals. You can easily modify your unit to respond to
A or B code signals.
1
/ I
B
ENTER
1-3
x
Keep pressing ENTER down during step 1.
Press the number key “1” for A, “2” for B or “3” for
C to change the remote control code.
Press
1/&
on the unit to turn off the unit with no
video tape inserted.
Press B on the unit for over 5 seconds while the
unit is turned off. The current code appears on the
display window.
Press x on the remote control to change the
unit’s code. The new code currently set on the
remote control blinks on the display window for
approximately 5 seconds, and is applied to the
unit.
•
1.
2.
3.
4.