Filter
Top Products
20
Slow Motion
While in still mode, press FF (M). The tape is
played at a speed 1/19 times slower than the nor
-
mal speed.
Use CH (- / +) on the Remote Control if
necessary to adjust the tracking.
To return to the normal speed, press
PLAY (
N).
Notes:
During slow motion, audio is muted and horizontal
lines (noise bars) may appear on the TV screen. This
is normal.
After 3 minutes in SLOW MOTION mode the
DVD+VCR goes back to PLAY mode to protect the
tape and video heads.
CM SKIP (Commercial Skip)
This feature is useful for skipping commercials or
short program segments.
Press v in playback mode.
The DVD+VCR performs a fast forward picture
search through 30 seconds of recording.
Press v again to extend the search time by an
addition 30 seconds. The maximum search time is
3 minutes.
When the search is complete, the DVD+VCR goes
into playback mode automatically.
VHS Hi-Fi Stereo/
MTS Broadcast
This DVD+VCR is equipped with the VHS Hi-Fi audio
sound system for recording and playback. The infor
-
mation below gives a brief description of Hi-Fi audio
and how to record and play a tape in the Hi-Fi audio
mode.
Hi-Fi Stereo Audio Sound
A stereo TV with AUDIO/VIDEO input jacks or a ste-
reo audio system is required for true stereo playback.
To experience the full and rich stereo sound available
with Hi-Fi recorded tapes, we recommend the con
-
nection of this unit to a home stereo audio system.
Set the AUDIO MODE option to HI-FI on the VCR
SETUP menu.
1.
2.
3.
•
•
1.
2.
3.
1.
Set the AUDIO OUTPUT option to STEREO so
that the left channel sound (L) is heard from the
left speaker and the right channel sound (R) is
heard from the right speaker.
The other options are (LEFT) POSITION, which
results in the left channel sound (L) being heard
from both speakers or (RIGHT) POSITION, which
results in the right channel sound (R) being heard
from both speakers.
Insert a cassette and press PLAY (
N).
MTS (Multi-Channel TV Sound)
This DVD+VCR can decode MTS stereo and bilingual
(SAP) off-the-air broadcast sound signals. It also
decodes stereo TV sound from local cable companies
as long as they operate on assigned cable frequen
-
cies and use the EIA-recommended MTS stereo/bilin
-
gual TV sound system.
Multichannel TV Sound Indicator (MTS)
When you press ENTER/OK one or both of the indi
-
cators appears on the TV Screen.
STEREO
The DVD+VCR can record in stereo onto the VHS
Hi-Fi audio tracks when the BROADCAST TYPE
option is in the STEREO position. The DVD+VCR can
also record mono audio onto the mono audio track.
SAP
Some stations transmit a Second Audio Program,
which is used for a second language or additional
information.
STEREO/SAP
Use the BROADCAST TYPE option to select the
desired recording mode (STEREO or SAP).
2.
3.