Filter
Top Products
advanced features48
Auto Satellite
Programme Recording
Auto Record from Satellite Receiver
This facility allows a programme timer-recorded using the satellite receiver to be
recorded on the VCR.
connect up Connect your satellite receiver, TV and VCR (see diagram below).
IMPORTANT
When you set L-2 SELECT to SAT (੬ pg. 51), it is possible to view a satellite
broadcast with the TV set to its AV mode even if the VCR is turned off. When
the VCR is in Stop mode or recording, press TV/VCR on the Remote Control to
turn off the VCR indicator on the display panel.
• If you turn on the VCR when the satellite receiver’s power is off, nothing
appears on the TV screen. In this case, turn on the satellite receiver, or set the
TV to its TV mode, or press TV/VCR on the Remote Control to set the VCR to
the video mode.
NOTE:
Refer to the instructions supplied with your satellite receiver.
IN/OUT
ENTREE/SORTIE
AV1(L-1)
IN/DECODER
ENTREE/DECODEUR
SORTIE
RF OUT
ANT. IN
ENTREE
OUT
SORTIE
SAT
CONTROL
SAT
CTL
AV2(L-2)
OUT
SORTE
VIDEO
L
R
ANTENNE
DECODER VCR TV
EXT.2 EXT.1
Outdoor Unit
Satellite Cable
TV Aerial
TV Aerial Cable
ANT. IN
RF OUT
Mains Outlet
21-pin AV Input
Connectors
(SCART)
Aerial
Connector
Satellite Receiver
Back of VCR
Back of TV
*DECODER function is not available in the UK.
HR-S7965EK-EN/p31-54 4/19/03, 01:35 PM48