Filter
Top Products
EN 23
Receiving Stereo And
Bilingual Programmes
Your recorder is equipped with a Sound-Multiplex decoder (A2)
and, if you own the HR-S8500EH, a Digital stereo sound
decoder (NICAM) as well, making reception of stereo and
bilingual broadcasts possible.
When the channel is changed, the type of broadcast being
received will be displayed on the TV screen for a few seconds.
To Record Stereo And
Bilingual Programmes (A2)
● Stereo programmes are automatically recorded in stereo on
the Hi-Fi audio track (with the normal audio track recording
mixed L and R channel sound).
● Bilingual programmes are automatically recorded in bilingual
on the Hi-Fi audio track. The main soundtrack will be recorded
on the normal audio track.
● To listen to a stereo programme, press AUDIO until " " and
" " appear on the front display panel or "HIFI L R"
appears on the screen.
● To listen to a bilingual programme, press AUDIO until " " or
" " appears on the front display panel, or "HIFI L " or
"HIFI R" appears on the screen (as required).
● To listen to the Standard (regular monaural) audio while
receiving a NICAM broadcast, press AUDIO until "NORM"
appears on the front display panel or on the screen.
(HR-S8500EH only)
NOTE:
"O.S.D." must be set to "ON" or the on-screen displays will not
appear (
੬
pg. 10).
Type of Broadcast
On-screen Display
Being Received
A2 Stereo ST
A2 Bilingual BIL
Regular Monaural (none)
*NICAM Stereo ST NICAM
*NICAM Bilingual BIL NICAM
*NICAM Monaural NICAM
*Available with HR-S8500EH only.
To Record NICAM Stereo
And Bilingual Programmes
(HR-S8500EH only)
The NICAM audio programme will be recorded on the Hi-Fi
audio track, and the Standard audio programme on the normal
audio track.
NOTES:
●
If the quality of stereo sound being received is poor, the
broadcast will be received in monaural with better quality.
●
Before playing back a programme recorded in stereo, or a
bilingual programme, refer to "Soundtrack Selection" (
੬
pg. 17).
Hi-Fi Audio Recording Level
Control
Your recorder allows manual adjustment of the Hi-Fi audio
recording level. Normally the preset audio recording level is
satisfactory, but if the sound you are going to record is too loud
or too low, adjust the audio recording level while referring to
the recorder's audio level meters.
ACCESS MAIN MENU
SCREEN
1
Press MENU.
ACCESS HI-FI REC LEVEL
CONTROL SCREEN
2
Press %fi to move the highlight bar (pointer) to “REC
LEVEL CTL”, then press OK or .
SELECT MODE
3
Move the highlight bar
(pointer) to “MANUAL” by
pressing %fi, then press
OK
or .
ADJUST AUDIO
RECORDING LEVEL
4
Press % or fi.
● Press % or fi briefly 5 times to move the on-screen's
audio levels by one division on the scale. To move the
audio levels faster, keep % or fi pressed.
● Adjust the recording level while watching the
recorder's audio level meters. Set the level so that
maximum volume causes the meters to vary between
0dB to 4dB.
RETURN TO NORMAL
SCREEN
5
Press MENU.
NOTE:
Noise will increase if the recording level is too low, while
distortion will increase if the level is too high.
%
%
HI-FI REC LEVEL CONTROL
PRESET
MANUAL
MIN
+
MAX
[
5
∞] =
[MENU] : EXIT