JVC HR-S9500EK VCR User Manual


 
63
q – –:– – (DISPLAY) Button switches display
between clock time, tape remaining time,
counter readings and preset position*. pg. 13
* Preset position is not displayed during playback.
w DAILY Button enables timer recording of daily
serials. pg. 15, 17
e WEEKLY Button enables timer recording of
weekly serials. pg. 15, 17
r AUX Button selects recorder's auxiliary input
mode. pg. 33, 34
t Button engages timer-standby mode.
pg. 15, 17
y DATE +/– Button inputs date of programme for
timer recording. pg. 16
u TV PROG +/– Button — same as button on
recorder. pg. 12
i 30 SEC Button initiates a 30-second period of
fast-motion playback. pg. 23
o Auto Tracking Button ( ) enables/disables
auto tracking mode during playback pg. 22
SP/LP Button selects tape speed. pg. 12
p Play Button — same as button on recorder.
pg. 10, 11
Q Fast Forward [FF] Button — same as button on
recorder. pg. 10, 11
W Pause Button — same as button on recorder.
pg. 11
E Button initiates functions such as Index
Search pg. 23, variable-speed search, frame
by frame playback. pg. 11, 24
TV +/–Button controls volume of connected
TV. pg. 30
R OK Button enters selections made in on-screen
menus. pg. 19
T JOG/SHUTTLE Button enables use of the
remote control's JOG dial/SHUTTLE ring.
pg. 11
Y SHUTTLE Ring performs forward and reverse
slow-motion and search during Still or Play
mode. pg. 11
How To Use
The remote control can operate most of your video recorder's
functions, as well as basic functions of TV sets and satellite
receivers of JVC and other brands. pg. 30, 31.
Point the remote control toward the sensor window.
The maximum operating distance of the remote control
is about 8 m.
NOTES:
When inserting the batteries, be sure to insert in the
correct directions as indicated under the battery cover.
If the remote control doesn't work properly, remove its
batteries, wait a short time, replace the batteries and then
try again.
%