Filter
Top Products
7
JLIP
AV1 IN/OUT
AV2 IN
AV1 OUT
COMP. Y/C
R
L
AUDIO
PAUSE/
R.A. EDIT
ANT. IN
RF OUT
OUT
S OUT
NOTES:
●
You can obtain high-quality S-VHS pictures.
●
If your television is not stereo-capable, use the recorder's
AUDIO OUT connectors to connect to an audio amplifier for
Hi-Fi stereo sound reproduction. (
੬
pg. 45)
●
To operate the recorder with your TV using the S-VIDEO
connection, set your TV to the VIDEO (or AV mode).
●
For switching the TV's mode, refer to the instruction manual
of your television.
ATTENTION
ⅢDo NOT Plug the mains power cord into a mains outlet until all connections are completed.
ⅢDo NOT press the button on the recorder or on the remote control to turn on the recorder's
power before you start the Auto Set Up procedure described on page 8.
Go to Step 3 – AUTO SET UP
AFTER YOU FINISH THIS STEP
Mains outlet
Mains Power Cord
Back of Recorder
Aerial connector
RF Cable (provided)
Back of TV
S-Video cable (provided)
Audio cable
(not provided)
S-VIDEO IN connector
AUDIO IN connectors
S-VIDEO CONNECTION
To connect to a TV with S-VIDEO/AUDIO IN connectors . . .
1– Connect the aerial, recorder and TV as per "RF CONNEC-
TION" (੬ pg. 6).
2– Connect the recorder's S OUT connector to the TV's S-
VIDEO IN connector.
3– Connect the recorder's AUDIO OUT connectors to the TV's
AUDIO IN connectors.