Filter
Top Products
January 31, 2003 6:13 pm Page 15
— 15 —
Master Page: Right
Connecting to a satellite receiver
Connect the decoder to the satellite receiver’s connector if you
have a decoder, EURO AV1 AUDIO/VIDEO connector to TV’s
connector, and EURO AV2 DECODER connector to the satellite
receiver’s connector. Then connect the satellite receiver and TV.
● To record a programme via the satellite receiver, set the input
mode to “AV2” by pressing AV and/or PR+/.
● To receive a scrambled broadcast, descramble the signal with
the decoder.
● For details, refer to the instruction manual for the satellite
receiver and decoder.
Connecting/Using a decoder
You can enjoy the variety of programming that is available
through scrambled channels.
A
Set “DECODER” to “ON”. (
੬
5)
B
Connect the recorder’s EURO AV2 DECODER connector to
the decoder’s 21-pin SCART connector using a 21-pin SCART
cable.
Connecting/Using a stereo system
(HR-V505/V506/V507E only)
You can listen to the soundtrack through your stereo system.
Connect the AUDIO OUT L and R connectors on the recorder to
the AUX IN or TAPE MONITOR connectors on your stereo
system’s receiver or amplifier.
● When listening to sound through the connected stereo system,
turn the TV’s volume down completely.
Child Lock
You can disable the recorder’s operations. While the recorder is
turned on, press . “SAFE” appears on the screen.
To release the child lock, press on the remote control until the
“OFF” blinks on the display panel.
● If any buttons on the recorder are pressed, “SAFE” appears on
the screen and blinks on the display panel.
NOTES:
● When the child lock function is in use, keep the remote control
out of the childrens reach.
● Timer recording programs will be performed even if the child
lock function activated.
System Connections Subsidiary Settings
HR-V505_205E-001EN.fm Page 15 Friday, January 31, 2003 6:13 PM