Filter
Top Products
45
Control Two JVC VCRs
The supplied remote control is capable of controlling two JVC
VCRs independently using the A/B CODE switch. You can set
this VCR so it responds to remote commands only when the
switch is set to B, and another VCR so it responds to commands
when the switch is set to A. The switch is preset to A because
this VCR normally responds to A-code signals. You can easily
modify this VCR to accept B-code commands.
12
45
3
6
8
0
7
9
POWER
TIMER
A/B CODE
UNPLUG VCR'S POWER
CORD
1
Unplug from the AC outlet.
SET A/B CODE SWITCH
2
Set the A/B CODE switch on the remote control to B.
PLUG IN POWER CORD
3
Plug back in to the AC outlet.
TURN VCR POWER ON
4
Press POWER on the remote.
The VCR will now respond only to B-code commands.
Child Lock
This feature allows you to prevent the operation of the VCR.
TURN VCR POWER ON
1
Press POWER.
ENGAGE CHILD LOCK
2
Press and hold POWER on the remote control until the
Child Lock indicator ("—") appears on the front display
panel.
● To cancel Child Lock, press and hold POWER on the
remote to turn the VCR on. During timer recording,
pressing TIMER also cancels Child Lock.
NOTES:
●
When Child Lock is engaged, make sure to keep the remote
control out of the reach of children.
●
Timer recording can be performed while Child Lock is
engaged. The feature remains in effect after the recording is
finished.