Filter
Top Products
EN 39
CHECK/CORRECT INPUT
DATA
6
If the data is correct as it is, go to step 7. If not, press
OK or SHUTTLE PLUS until the item you want to
change begins to blink. Then press the appropriate
NUMBER keys, CH5
∞
or SHUTTLE PLUS %fi to
obtain the desired setting.
● If you are using a DBS receiver, the BAND indication
(TV or CATV or DBS) appears at right of the channel
number display when OK or SHUTTLE PLUS is
pressed. See "ATTENTION FOR DBS RECEIVER
USERS" on page 41.
RETURN TO NORMAL
SCREEN
7
Press MENU as many times as necessary.
● Press just once to access the Auto Timer screen
(੬ pg. 43).
ENGAGE TIMER MODE
8
Press TIMER. The VCR turns off automatically.
NOTES:
●
To disengage the timer before recording starts, press TIMER
again. Pressing once more re-engages it.
●
In case of a power failure after programming, the VCR’s
memory backup keeps your selections for approximately
10 minutes.
●
Backup time will become shorter as the unit is used.
●
When timer-recording cable channels received through a
Cable Box, be sure to keep the Cable Box set to ON.
fi
%
3
¶
4¢
78
1
¡
1
2
3
456
7
8
0
9
MENU
TIMER
CH
NUMBER
OK
SHUTTLE PLUS
fi
%