Filter
Top Products
EN 41
MAKE CORRECTIONS
6
To change any of the settings, press OK or SHUTTLE
PLUS until the item you want to change begins
blinking. Then set as in step 5.
RETURN TO NORMAL
SCREEN
7
Press MENU as many times as necessary.
● Press just once to access the Auto Timer screen
(੬ pg. 43).
ENGAGE TIMER MODE
8
Press TIMER. The VCR turns off automatically.
3
¶
4¢
78
1
¡
1
2
3
456
7
8
0
9
2
2
q
5
/
8
6
MENU
OK
CH
TIMER
NOTES:
●
To disengage the timer before recording starts, press TIMER
again. Pressing once more re-engages it.
●
In case of a power failure after programming, the VCR’s memory
backup keeps your selections for approximately 10 minutes.
●
If you select "PROGRAM SET" without having set the date and
time, an error message appears. Follow its instructions.
●
If you enter a start time that has already passed, "ERROR"
appears on the screen and blinks.
●
Programs that start after midnight must have the next day’s date.
●
After timer recording is completed, the VCR’s power goes off
automatically.
●
You can program the timer while a regular recording is in
progress; the on-screen menu will not be recorded.
●
If the end of tape is reached during timer recording, the
cassette is automatically ejected.
●
When timer-recording cable or satellite channels through an
external tuner, be sure to keep the cable box or satellite
receiver's power ON.
%
fi
ATTENTION FOR DBS RECEIVER USERS
If you are using a DBS receiver (unless "DBS RECEIVER OUTPUT" is set to "OFF" ੬ pg.21), the BAND
indication (TV or CATV or DBS) appears to the right of the channel number display. If the channel
number that has been entered requires that the band be set, the BAND indication starts blinking:
a- TV : To timer-record a regular TV program received on the VCR.
b- CATV : To timer-record a cable TV program received on the VCR, or through a cable box (unless
"CABLE BOX OUTPUT" is set to "OFF" ੬ pg.16).
c- DBS : To timer-record a satellite program received through a DBS receiver.
Press CH 5∞ or SHUTTLE PLUS %fi to select the appropriate band, then press OK.
● If "BAND" is set to "TV" at the Band screen (੬ pg.13), CATV will not be displayed on the Program
screen; if it is set to "CATV", TV will not be displayed.
CH
OK
MENU
PROGRAM 1
DATE 12/24 WED
START 12:00 PM
STOP 1:00 PM
CHANNEL 110 DBS SP
PRESS NUMBER KEY (O–9)
OR (5,∞), THEN (OK)
PRESS (MENU) TO END
SHUTTLE PLUS