Filter
Top Products
EN 15
Setting ghost reduction
This VCR is equipped with the ghost reduction function.
It reduces the ghosts using a GCR (Ghost Canceller
Reference) signal sent from a TV station. The ghost
reduction mode can be set for each channel
independently and manually.
NOTES:
●
Ghosts may not be reduced in the following cases:
– The broadcasting signal does not have a GCR signal.
– The antenna is not connected correctly.
– There are too many ghosts.
– The signal is reflecting from moving objects (airplane, etc.).
●
The images on the screen may be distorted when tuning from
one channel to another or the power is turned on while the
ghost reduction function is activated.
Access Main Menu screen
Press MENU.
Access Tuner Set screen
On the front panel:
Press CH5∞ to move the highlight bar (arrow) to
“TUNER SET”, then press OK.
On the Remote:
Press %fi to move the highlight bar (arrow) to
“TUNER SET”, then press OK or
#
.
Access Manual Channel Set screen
On the front panel:
Press CH5∞ to move the highlight bar (arrow) to
“MANUAL CHANNEL SET”, then press OK.
On the Remote:
Press %fi to move the highlight bar (arrow) to
“MANUAL CHANNEL SET”, then press OK or
#
.
Select a channel and set ghost reduction
mode
On the Remote ONLY:
Press the Number
keys or %fi to input
a channel number.
Press SP/EP ( ) to
select the desired
ghost reduction mode.
You have three choices:
STANDARD – Normally select this
SOFT – Select when you prefer softer picture
than when “STANDARD” is selected.
OFF– Select when neither “STANDARD”
nor “SOFT” improves the picture.
Return to normal screen
Press MENU.
–
What is a “ghost”?
Double images of a TV program, or a “ghost”, is a
common problem with TV reception in urban areas. A
broadcasting signal, reflected from some surfaces (building,
mountain, etc.), arrives slightly later than the signals
arriving directly from the TV station. This causes such
ghosts as follows:
– Double images
– Faint images
– Distorted images
– Distorted colors
– Vertically jittered images
MANUAL CHANNEL SET
(CATV)
CH 45 ADD
GR STANDARD
PRESS NUMBER KEY (0–9)
OR (5,∞), THEN (OK)
GR MODE: PRESS (SP/EP)
PRESS (MENU) TO END
123
456
7
89
0
VCR TV CABLE/DBS
–