Filter
Top Products
24
Operation
You can partially switch the settings of features (factory settings).
All switches are set to AOFFB in the factory settings.
Note:
● Be sure to change the DIP switch settings under Operate
OFF mode.
Ⅵ DIP Switch 1
For setting the [GAIN] selection button's AALCB feature.
Note:
● For GY-HD200 and GY-HD250, this setting is invalid as
the gain value and shutter are standard settings when
automatically set (ALC+EEI). To use GY-HD200 and GY-
HD250 when only the gain value is automatically set
(ALC), please consult your nearest JVC's authorized
dealers.
Ⅵ DIP Switch 2
For setting the [AUTO IRIS LEVEL] feature.
Ⅵ DIP Switch 3
For setting the [IRIS MODE] when AALCB is selected for the
[GAIN] button.
Ⅵ DIP Switch 4
Reserved switch. Make sure that this is set to AOFFB during
use.
Ⅵ DIP Switch 5
Reserved switch. Make sure that this is set to AOFFB during
use.
Ⅵ DIP Switch 6
For setting input signals of the [TALLY] terminal.
Setting Selection DIP
Switch
Fun-
ction
For selecting the feature to use when AALCB is
selected, if the connected camera comes with both
the (ALC) mode, which automatically adjusts the
gain value only, as well as the (ALC+EEI) mode,
which adjusts both the gain and shutter values
automatically.
Set-
ting
OFF Use as AALCB.
ON Use as AALC+EEIB.
Fun-
ction
For specifying whether the AIRISB lever is to be
used as the [AUTO IRIS LEVEL] adjustment lever
when the iris mode is set to AAUTOB.
Set-
ting
OFF Use as adjustment lever for
AAUTO IRIS LEVELB.
ON Use as adjustment lever for
AAUTO IRIS LEVELB disabled.
(Operation is disabled, and the
AUTO IRIS LEVEL is fixed to the
standard value.) )
Fun-
ction
For setting whether the iris mode is to be forcibly
switched to AAUTOB when AALCB is selected for the
[GAIN] button.
Set-
ting
OFF Forcibly set to AAUTOB.
ON Not forcibly set to AAUTOB. (Iris
mode complies with the switch
status.) )
Fun-
ction
For setting the input signals of the [TALLY] terminal.
Set-
ting
OFF Use as Acontact input systemB.
ON Use as Aopen collector input
systemB.
HIGH: ON, LOW: OFF