Filter
Top Products
47
SR-9090U
REC
REC
STOP
REC
CHECK
EJECT
OPERATE
REVERSE
FIELD REV
FIELD ADV
REW PLAY
TRACKING
TIMER
SEARCH
RESET/
CANCEL
DISPLAY LOCK
HDR
CNT RESET
MENU
TIME MODE
SHIFT
ON SCREEN
OPERATE
V. LOCK
PAUSE
FF
–
+
–
+
SET
–
+
7 PLAYBACK AND SPECIAL-EFFECTS PLAYBACK
[PAUSE] button
[REVERSE] button
[REW] button
[FF] button
Still playback
1 Press the [PAUSE] button during playback.
The still indicator is shown on the display and
the still picture is shown.
2 Press the [PLAY] button to restore the Normal Play
mode.
The Stop mode is automatically engaged if the VCR
remains in the Still mode for 3 minutes (approx.).
Field advance playback
1 Press the [PAUSE] button in the Play mode to engage
the Still mode.
2 While pressing the [PAUSE] button, press the [FF]
button or [REW] button.
The operation varies depending on how the [FF] or
[REW] button is pressed.
5 Each time the [FF] button or [REW] button is pressed,
the picture is advanced or reversed one field.
5 When the [FF] button or [REW] button is pressed for
more than 2 seconds, the picture is
advanced or reversed continuously field
by field (continuous field advance
playback).
3 Press the [PAUSE] button in the Continuous Field
Advance Play mode to restore the Still mode.
Press the [PLAY] button to restore normal playback.
• In the Continuous Field Advance Play mode, no
sound is output.
• When continuous field advance playback continues
for about 3 minutes, the Stop mode is automatically
engaged to protect the tape.
• When forward field-by-field playback is switched to
reverse field-by-field playback, noise may appear in
the picture for several seconds.
• During reverse field-by-field playback, noise may
appear in the picture.
Reverse playback
1 Press the [REVERSE] button in any mode except
Record, Record-Pause or Record Check.
The reverse indicator is shown on the display and
the Reverse mode is engaged.
• The tape is played back in reverse in the 2H or 6H
mode regardless of the playback speed mode setting.
* No sound is output.
2 Press the [PAUSE] button to engage the Still mode.
To restore the normal playback, press the [PLAY]
button.
7-3 Special-Effects Playback
[PLAY] button