Filter
Top Products
23
Playback
This section explains basic operations of DVD player.
For more details about DVD player operations, see pages 37 to 49.
• shows the types of discs the operation is
available for.
• Turn on your TV and select the correct input mode on the TV.
IMPORTANT
Before using the remote control for the following
operation;
1 Set the remote control mode selector to
AUDIO.
2Press DVD.
7 To load a disc
1 Press 0 on the center unit or OPEN/
CLOSE on the remote control to open
the disc tray.
The system turns on and the disc tray comes out.
2 Place a disc on the disc tray.
7 To start playback
3 Press 3 (play button).
The system starts playback after closing the disc tray.
You can use the same buttons on the center unit for operations
unless otherwise noted.
When loading an MP3 disc
The MP3 control display (A pg. 40) appears on the TV screen and
playback starts from the first track in the first group after pressing
3 (play button) in step 3. When all tracks in a group have been
played, the system starts playback of tracks in the next group.
When loading a JPEG disc
The slide-show* playback starts from the first file in the first group
after pressing 3 (play button) in step 3. When stopping playback of
a JPEG disc, the JPEG control display (A pg. 41) appears on the
TV screen.
* Slide-show
Each file (still picture) is shown on the TV screen for about 3
seconds, then changed to the next file one after another
automatically. When all files in a group have been played, the
system starts playback of files in the next group.
7 To pause playback
Press 8.
To return to normal playback, press 3 (play button).
7 To stop playback
Press 7.
To remove a disc
Press 0 on the center unit or OPEN/CLOSE on the remote
control.
Remote control
mode selector
(play button)
Basic playback
With the label side up
When placing an 8 cm disc
TH-A85-55[B]-05Basic.fm Page 23 Wednesday, April 2, 2003 1:03 PM