JVC HR-S9400E VCR User Manual


 
46 EN
AV1 IN/OUT
RF OUT
AV2 IN/DECODER
PAUSE/
R.A.EDIT
AV1 OUT
ANT.IN
COMP.
Y/C
R
R
L
L
AUDIO
S
IN
IN
OUT
OUT
SYSTEM CONNECTIONS (cont.)
Connecting/
Using A Stereo
System
These instructions enable you to connect your video recorder to
your Hi-Fi stereo system (if you have one) and listen to the
soundtrack through the stereo.
MAKE CONNECTIONS
1
a– Connect the AUDIO IN L and R on your video recorder
to the audio output connectors on your amplifier.
b– Connect the AUDIO OUT L and R connectors on your
video recorder to the AUX IN or TAPE MONITOR
terminals on your stereo system’s receiver or amplifier.
CAUTIONS:
This recorder has a dynamic range of more than 80 dB with
regards to its Hi-Fi audio capability. It is recommended that
you check the maximum level if you are going to listen to the
Hi-Fi audio signals through a stereo amplifier. A sudden surge
in the input level to the speakers may damage them.
Some speakers and televisions are specially shielded to
prevent television interference. If both are of the non-shielded
type, do not place the speakers adjacent to the TV set as this
can adversely affect the video playback picture.
NOTES:
When connecting your recorder’s audio output connectors to
a stereo amplifier, make sure you connect L and R correctly.
If stereo or bilingual TV broadcasts are receivable in your
area, this recorder can record them independently of the TV
set and play them back through the connected stereo system.
When listening to sound through the connected stereo system,
turn the TV’s volume down completely.
AUDIO OUT
AUDIO IN
Rear View
Mains outlet
ANT. IN
RF OUT
Aerial or Cable
AV1 IN/OUT