Filter
Top Products
EN 49
Your remote control can operate the basic functions of your
satellite tuner set. In addition to JVC satellite tuners, other
manufacturer’s satellite tuners can also be controlled by setting the
appropriate switch on the remote control.
Before you start . . .
● Turn on the satellite tuner using its remote control.
● Set the remote control’s TV/SAT/VCR switch to SAT.
Satellite
Tuner Multi-
Brand Remote
Control
SET SATELLITE TUNER
BRAND CODE
1
Refer to the chart below. While holding down ,
enter your satellite tuner’s brand code using the
NUMBER keys, then press STOP.
● Some satellite tuner brands have more than one code.
If the satellite tuner does not function with one code,
try entering another.
● You don’t have to repeat this step until you replace
your remote control’s batteries.
TRY OPERATING SATELLITE
TUNER
2
Press on the remote to turn the satellite tuner off. If
it goes off, try other operations.
● The button, TV PROG +/– button, NUMBER
buttons on the remote can all be used to operate the
satellite tuner.
● The NUMBER buttons will not work with JVC satellite
tuners using code 13.
● With satellite tuners using Code 16, the
button
corresponds to the ENTER button of your satellite
tuner’s remote control.
● To return the remote to video recorder control, set its
TV/SAT/VCR switch to VCR.
IMPORTANT
Although the provided remote control unit is compatible with
JVC satellite tuners, as well as many other models, it may not
work with your satellite tuner, or in some instances, may have
limited function capability.
SATELLITE TUNER BRAND CODE
JVC 13, 14
AMSTRAD 01, 02, 03, 04
SIEMENS 05
GRUNDIG 05, 06
KATHREIN 05, 11, 12
PACE 06, 08
PHILIPS 07
ITT 09
NOKIA 09
SKYMASTER 10
RFT 10
MASPRO 11
BT 13
PANASONIC 15
JERROLD 16
12
45
3
6
8
0
7
9
2
4
1
3
STOP
NUMBER
TV PROG
TV/SAT/VCR