JVC HR-S9400E VCR User Manual


 
EN 51
12
45
3
6
8
0
7
9
2
4
1
3
OK
PUSH JOG
AUTO SET
PLEASE WAIT
[MENU] : EXIT
0
+++
PERFORM AUTO CHANNEL
SET
5
Press PUSH JOG%
to
move the highlight bar
(pointer) to the
language of your
choice , then press OK
to initiate Auto
Channel Set.
The Auto Set screen
appears, and
remains on screen
while the recorder searches for receivable stations. As
Auto Channel Set progresses, the "
" mark on the
screen moves from left to right. Wait until the screen
as shown in step 6 appears.
VIEW CONFIRMATION
SCREEN
6
The stations your recorder
located appear on a
Confirmation screen —
channel positions (PR),
channels (CH) and station
names (ID– pg. 54). To
view the next page of the
listing, press PUSH
JOG%fi . The blueback
screen and the program
currently being broadcast by the
blinking station appear alternately for 5 seconds each.
The stations located in the selected country appear at
the top of the list.
The Guide Program numbers will also be set
automatically during Auto Channel Set.
RETURN TO NORMAL
SCREEN
7
Press MENU.
Depending on the reception conditions, the stations
may not be stored in order, and the station names
may not be stored correctly.
Using the Confirmation screen, you can skip or add
channel positions, enter station names and perform
other operations. Refer to pages 52 – 53 for the
procedures.
For information on scrambled broadcasts, refer to
page 52.
Beginning
End
MENU
IMPORTANT
Depending on the reception conditions, the station names
may not be stored correctly, and auto Guide Program
Number Set may not work properly. If the Guide Program
numbers are not set properly, SHOWVIEW timer recording
(pg. 28) will not work correctly; be sure to check if the
Guide Program numbers have been set correctly
( pg. 12, "SHOWVIEW Setup").
Since your video recorder memorizes all detected
stations even if the reception condition is poor, some of
those stored stations may produce a noisy picture. To
delete those stations, "Delete A Channel" on page 52.
5
5
PR CH ID PR CH ID
01 25 ARD 08 C26 E-SP
02 C08 SKY1 09 55
WEST
03 10 ZDF 10 C24 SAT1
04 C65 RAI1 11 C23 OSF
05 C31 BBC1 12 C25 ESPN
06 C32 BBC2 13 C37 CNN
07 C33 3SAT 14 C35
[5
]
=
: EDIT
= [CANCEL] : DELETE
[MENU] : EXIT
5
5
C: Cable
%
%
NOTE:
Fine tuning is performed automatically during Auto Channel
Set. If you want to perform it manually, refer to page 53.