JVC HR-VP636U VCR User Manual


 
10
12
45
3
6
8
0
7
9
SELECT TIME ZONE
5
You can either select
“AUTO”, or select the
correct zone. If you
selected "AUTO" in step 4
and if you live near the
boundary of an adjacent
time zone, or receive
cable TV channels, a PBS
channel from a different
time zone may become your host channel. Therefore,
in this case make sure to manually select the correct
time zone. Place the arrow next to your choice by
pressing CH
5
or SHUTTLE PLUS
5
, then press
MENU to return to the Semi-Auto Clock Set screen.
SELECT D.S.T. MODE
6
You have three choices:
a–Select “AUTO” and the
adjustment to your VCR’s
clock will be made
according to the incoming
signal from the host
channel.
b–Select “ON” and the
adjustment will be made
based on the clock itself.
c–Select “OFF” if Daylight Saving Time doesn’t apply to
you.
Place the arrow next to your choice by pressing
CH
5
or SHUTTLE PLUS
5
, then press MENU and
the Semi-Auto Clock Set screen reappears.
2
2
q5
/
8
6
CH
MENU
CH
MENU
SHUTTLE PLUS
INITIAL SETTINGS (cont.)
TIME ZONE SELECT
=AUTO MOUNTAIN
ATLANTIC PACIFIC
EASTERN ALASKA
CENTRAL HAWAII
PRESS (
5
,) TO SELECT
PRESS (MENU) TO END
D.S.T. SELECT
=AUTO
ON
OFF
PRESS (
5
,) TO SELECT
PRESS (MENU) TO END
IMPORTANT
After performing the Semi-Auto clock set procedure, make
sure that the VCR is off before the next hour so that the clock
can be set. (The clock is automatically adjusted on the hour
except at 11:00 PM, midnight, 1:00 AM and 2:00 AM.)
**AUTO DAYLIGHT SAVING TIME
This function enables automatic adjustment of the VCR’s clock
at the start and end of Daylight Saving Time.
With Auto DST activated, . . .
. . . on the first Sunday of April at 2:00 AM, the clock is adjusted
to 3:00 AM.
. . . on the last Sunday of October at 2:00 AM, the clock is
adjusted to 1:00 AM.