Filter
Top Products
44
EDITING (cont.)
2
2
q5
/
8
6
Edit From A
Camcorder
You can use a camcorder as the player and your VCR as the
recorder.
MAKE CONNECTIONS
1
Connect an AV cable (not supplied) between the
camcorder’s VIDEO OUT and AUDIO OUT connectors
and your VCR’s VIDEO IN and AUDIO IN connectors.
● When a Master Edit Control-equipped JVC camcorder is
used, the camcorder is capable of controlling your VCR.
The editing cable is a mono 3.5 mm mini-plug to
mono 3.5 mm mini-plug connector.
LOAD A CASSETTE
2
Insert the cassette to be recorded on into the recorder.
SET RECORDER’S INPUT
MODE
3
Press NUMBER key “0” to set to AUX.
ACCESS MAIN MENU
SCREEN
4
Press MENU as many times as necessary.
ACCESS FUNCTION SET
SCREEN
5
Press CH
5
∞
or SHUTTLE PLUS
5
∞
to place the arrow
next to “FUNCTION SET”, then press OK.
If you’re using a JVC Master Edit Control-equipped
camcorder — step 6
If not — step 9
ACCESS SPECIAL
FUNCTION SCREEN
6
Press CH
5
∞
or SHUTTLE PLUS
5
∞
to place the arrow
next to “SPECIAL FUNCTION”, then press OK.
SELECT MODE
7
Press CH
5
∞
or SHUTTLE
PLUS
5
∞
to place the
arrow next to “PAUSE”.
RETURN TO FUNCTION
SET SCREEN
8
Press MENU.
AUDIO
IN
VIDEO
IN
Camcorder
Player
VIDEO
OUT
AUDIO OUT
12
45
3
6
8
0
7
9
CH
MENU
OK
NUMBER "0"
SHUTTLE PLUS
Recorder Your VCR
Editing cable (not supplied)
(JVC camcorder only)
EDIT
To rear panel PAUSE/AV
COMPU-LINK connector
SPECIAL FUNCTION
=PAUSE
AV COMPU-LINK
PRESS (
5
,∞) TO SELECT
PRESS (MENU) TO END