Filter
Top Products
61
13 MEMORY FEATURES
MEMORY TRANSFER
■ Memory \ VFO Transfer
After retrieving frequencies and associated data
from Memory Recall mode, you can copy the data
to the VFO. This function is useful, for example,
when the frequency you want to monitor is near
the frequency stored in a memory channel.
1 Recall the desired memory channel.
2 Press [M
ss
ss
sVFO/ MG.SEL].
• When a simplex channel is recalled, the
data is copied to VFO A or VFO B,
depending on which VFO was used to recall
the channel.
• When a split channel is recalled, the RX
data is copied to VFO A and the TX data is
copied to VFO B.
Note:
◆
The Memory Channel Lockout status and the subtone
frequency are not copied.
◆
Pressing [M
ss
ss
s
VFO/ MG.SEL] after temporarily changing the
retrieved data copies the new data to the VFO.
■ Channel \ Channel Transfer
You can also copy channel information from one
memory channel to another. This function is
useful when storing frequencies and associated
data that you temporarily change in Memory
Recall mode.
1 Recall the desired memory channel {page 59}.
2 Press [M.IN] to enter Memory Scroll mode.
• To exit Memory Scroll mode, press [CLR].
3 Select the memory channel where you would
like the data copied, using the MULTI/ CH
control.
4 Press [M.IN] again.
982~00lennahC a 982~00lennahC
ycneuqerfXR
a
ycneuqerfXR
ycneuqerfXT
a
ycneuqerfXT
XRrofedoM
a
XRrofedoM
XTrofedoM
a
XTrofedoM
ycneuqerftesffO
a
ycneuqerftesffO
noitceridtfihS
a
noitceridtfihS
FFO/NOesreveR
a
FFO/NOesreveR
petsycneuqerfXR
a
petsycneuqerfXR
petsycneuqerfXT
a
petsycneuqerfXT
ycneuqerfenoT
a
ycneuqerfenoT
ycneuqerfSSCTC
a
ycneuqerfSSCTC
edocSCD
a
edocSCD
SCD/SSCTC/enoT
FFO/NO
a
SCD/SSCTC/enoT
FFO/NO
emaNyromeM
a
emaNyromeM
lennahCyromeM
FFO/NOtuokcoL
a
lennahCyromeM
FFOtuokcoL
982~00lennahC a 992~092lennahC
ycneuqerfXR
a
ycneuqerfXR/XT
)xelpmis(
ycneuqerfXT
a
XRrofedoM
a
XR/XTrofedoM
)xelpmis(
XTrofedoM
a
ycneuqerftesffO
a
ycneuqerftesffO
noitceridtfihS
a
noitceridtfihS
FFO/NOesreveR
a
FFO/NOesreveR
petsycneuqerfXR
a
ycneuqerfXR/XT
)xelpmis(pets
petsycneuqerfXT
a
ycneuqerfenoT
a
ycneuqerfenoT
ycneuqerfSSCTC
a
ycneuqerfSSCTC
edocSCD
a
edocSCD
SCD/SSCTC/enoT
FFO/NO
a
SCD/SSCTC/enoT
FFO/NO
emaNyromeM
a
emaNyromeM
lennahCyromeM
FFO/NOtuokcoL
a
lennahCyromeM
FFOtuokcoL
992~092lennahC a 982~00lennahC
ycneuqerfXR/XT
a
ycneuqerfXR
a
ycneuqerfXT
XR/XTrofedoM
a
XRrofedoM
a
XTrofedoM
ycneuqerftesffO
a
ycneuqerftesffO
noitceridtfihS
a
noitceridtfihS
FFO/NOesreveR
a
FFO/NOesreveR
ycneuqerfXR/XT
)xelpmis(pets
a
petsycneuqerfXR
a
petsycneuqerfXT
ycneuqerfenoT
a
ycneuqerfenoT
ycneuqerfSSCTC
a
ycneuqerfSSCTC
edocSCD
a
edocSCD
SCD/SSCTC/enoT
FFO/NO
a
SCD/SSCTC/enoT
FFO/NO
emaNyromeM
a
emaNyromeM
lennahCyromeM
FFO/NOtuokcoL
a
lennahCyromeM
FFOtuokcoL
When copying a memory channel 290 ~ 299 a
channel 290 ~ 299, Memory Channel Lockout
status changes to OFF, regardless of the original
channel settings.
The tables above illustrate how data is transferred
between memory channels.