Kenwood MD-MT877W DVD Recorder User Manual


 
14
Using with the AC Adaptor
1 Place the portable MD to the battery
charger.
2 Move the Charge/Operation switch to
operation mode.
3 Plug the AC adaptor.
Caution:
If the Charge/Operation switch is not set to operation
mode, no operation is possible.
(See “How to use the Charge/Operation switch”, page 11)
When the unit is not in use for extended periods, re-
move the AC adaptor from the wall socket.
Insert the plugs firmly.
Note:
When power failure occurs whilst playing back using the
AC adaptor, disconnect the adaptor from the wall socket.
Otherwise, playback may start automatically when the
power returns.
To the DC IN
5V socket
AC 110-240V
50/60Hz
Operation mode
Power Source
Using with the AC Adaptor