Kenwood MD-MT877W DVD Recorder User Manual


 
55
References
Error Messages
Error Messages (continued)
ERROR MESSAGES
NO DISC
NO SIGNAL
(noSIG.)
PLAY MD
(PLAYmd)
POWER ?
PROTECTED
SORRY
(Sorry)
TEMP OVER
(TEMP!)
TOC FORM **
(Tform**)
TOC FULL
Tr. Protect
? DISC
(? DISC)
MEANING
A disc has not been loaded.
Poor connection of the digital cable.
No output signal comes out from the connected
unit to playback.
The input signal has improper sampling fre-
quency.
You recorded on a playback-only disc.
The battery charger is defective.
The write protection tab of a MiniDisc is set to
the protected position.
You tried to record on a playback-only disc.
Since a track number is currently being located
or updated, the unit cannot accept your com-
mand.
The temperature is too high.
There is an error in the recording signal.
There is no space left for recording character
information (track names, disc names, etc.).
The track has been protected from being erased.
A disc which contains data other than music was
played.
There is an error in the signal recorded on the
disc.
Stamping is not possible.
REMEDY
Load a disc.
Connect the digital cable securely.
If the portable CD player has a function to prevent sound
skips, deactivate it.
Playback with the connected unit.
Replace it with a recordable disc.
To have it repaired, go to the distributor where you
purchased the unit.
Move the write protection tab back to its original position.
Replace it with a recordable MiniDisc.
Wait for a while and try the operation again.
Turn off the power, and wait for a while.
Erase all of the tracks, and then record again.
Replace it with another recordable disc.
Edit the track with the device on which it was recorded.
A disc which contains non-music data cannot be played.
Replace it with another recorded disc.
Retry.
( ) : Error messages seen on the remote control.
Number or symbol appears in * position.