A SERVICE OF

logo

Installation Guide
Initial Release
Part #: M-S2-021-11
Keep all product manuals as a product component during the life span of the servo amplifier.
Pass all product manuals to future users/owners of the servo amplifier.
NOTICE:
1.) This S200 Option requires the use of special user interface software called S200 OC Tools. This software can be
installed using the included CD ROM. This device will not communicate with the standard S200 Tools software.
2.) Common Problems
a.) If all dip switches are set to ON (Toggled to the right), the unit enters a perpetual rest state and does not
communicate. Change dip switch settings.
b.) Most error codes generated at the drive-level display an ‘F20’ fault code. Connect the GUI and look in the
Status Screen for a ‘b-level'- fault code with an explanation of the fault condition.
c.) When selecting a non-SFD motor, be certain to enter the ‘motor poles’ data.
d.) Always remember to Save the configuration to Non-volatile memory.
Helping you build a better machine, faster.