Filter
Top Products
131
WAV
WAV files stored on a DOS format external SCSI disk
do not appear in the WAV file list
Are they saved in a sub-directory?
→ Sub-directories are not supported for media other than
CD-ROM, CD-R, or CD-RW. Re-save the WAV files in
the root directory.
Can’t preview
Is the WAV file in a supported format?
→ Preview WAV files of a supported format. (→p.68, 86)
Is the file name appropriate?
→ The D1600 supports file names that are compatible with
ISO 9660 Level 1.
Confirmation messages
Completed
The operation has been completed successfully. Select
the “OK” button and press the [ENTER] key.
SongFull
The maximum number of songs that can be stored on a
disk drive has been exceeded.
→ Either delete unneeded songs, or select another drive.
***ing (*** is Copy or Write, etc.)
An operation is in progress. Please wait until this dis-
play disappears.
Obey Copyright Rules
When using digital input or when creating an audio
CD, please carefully read the section “COPYRIGHT
WARNING” (→p.1), and observe the copyright law.
Error messages
Can’t Play CD
Could not play an audio CD.
→ If the CD has not been finalized, finalize the CD before
playing it.
→ If the CD has been finalized, check the connections of
the drive. If there are no problems with the connections
or operation, try another disc.
Disc Full
When writing an audio CD, there was insufficient space
on the CD.
→ Write to new CD media.
Disk
Failure while reading from the disk drive.
→ In [SYSTEM] “DiskUtil” tab page, execute “Check-
Drive.” If this message still appears, please delete that
song. If this message still appears even after you have
deleted the song, please re-format the disk drive.
If you “Format” the internal 20 GB drive, approxi-
mately 240 minutes will be required for the opera-
tion to be completed. If you execute “CheckDrive,”
approximately 30 minutes will be required if “Full”
is off, or approximately 240 minutes if “Full” is on.
DiskBusy
If this message appears when you have just begun to
use a disk drive, the disk drive is too slow to perform
recording/playback.
→ Please use this disk for backup.
Disk drive reading speed may be slowed down if
punch-in/out recording or track editing has caused the
data to be fragmented across the disk.
→ In [TRACK] “EditTrack” tab page, execute “Optimize-
Track.” If an error message appears even after you exe-
cute “OptimizeTrack,” please execute “CheckDrive.”
Messages
Appendices
Messages