Filter
Top Products
13
Objects in the LCD screen and their
functions
The LCD screen of the D1600 features the Touch View
system, which uses a touch panel.
By pressing objects displayed in LCD screen you can
perform operations such as selecting pages, setting
parameter values, moving the cursor location, or edit-
ing settings.
In this manual, terms enclosed in “quotation
marks” such as “...
”, “...” button, or “...” tab refer to
objects in the LCD screen which you can operate.
Terms enclosed in square brackets such as [...] key,
[...] knob, [...] dial, or [...] fader refer to controls etc.
located on the top panel, front panel, or rear panel.
a: Current parameter display
This is the name of the parameter currently selected by
the edit cell.
For icon-type parameters such as EQ or fader, the value
is displayed at the right.
b: Edit cell
When you select a parameter in the LCD screen, the
parameter value will be highlighted in some cases. This
area is referred to as the edit cell, and your editing will
apply to the highlighted portion.
The parameter value in the edit cell can be modified
using the [VALUE] dial (→p.8) or by using the popup
buttons in the LCD screen.
c: Popup button
When you press this button, a dialog box (f) will
appear.
To enter a parameter value, choose the desired value
from the dialog box.
, ,
d: Toggle button
Pressing this type of button will alternately switch a
function between on/off.
(on)/ (off)
e: Tab page
Each mode contains numerous parameters, which are
organized into pages. Each page is accessed by its own
tab.
f: Dialog box
To execute, press the “OK” button. To cancel, press the
“Cancel” button. The dialog box will close.
g: Radio buttons
These buttons are used to select one of multiple items.
Press one of the radio buttons.
h: Icons
These are objects shaped like faders or knobs. To mod-
ify a value, select it and rotate the [VALUE] dial.
i: Scroll buttons
These buttons are used to view parameter values that
cannot be displayed in a single screen.
Objects in the LCD screen
e: Tab
a:Current parameter
display
c:Popup
button
d:Toggle
button
b: Edit cell
g: Radio buttons f: Dialog box
h: Icons
i: Scroll buttons
Introduction
Objects in the LCD screen and
their functions