Filter
Top Products
41
Moving a registered scene to another time
location
Here’s how to move a registered scene to another time
location.
1 Recall the scene.
As described in “Recalling a scene,” recall the scene
that you wish to move.
2 Move the time location of the scene.
• Press the “EditLoc” button.
• Specify the time location in the dialog box, press
the “OK” button to execute the move.
Scene filtering
1 In the [SCENE] “ReadDel” tab page, press the
“Filter” button to display “Select SceneFilter.”
2 Select the parameters whose settings you wish to
disable.
There are two pages of settings, and you can use
the “Next” button to access the next page.
The first page contains settings for the parameters
of each channel. For example you can use the filter
to disable the pan settings for channels 5 and 6 by
turning the “5,” “6,” and “Fader” buttons “On.”
The second page contains settings for overall
parameters. As in the first page, turn on the param-
eters that you wish to disable. Press the “OK” but-
ton to finalize the settings.
Using MIDI to control scenes
MIDI output
When the scene changes, a scene change message (pro-
gram change) will be transmitted. This message will be
transmitted in the following cases.
• When you use “SceneNumber
” to switch scenes in
the [SCENE] “ReadDel” tab page
• When you press the [STORE] key and [SCENE] key
to register a scene
• When “SceneRead” is “On” and the scene changes
during playback or recording
MIDI input
If “SceneRead” is “Off”, scene change messages (pro-
gram changes) that are received will cause the D1600 to
select the scene of the corresponding number.
If “SceneRead” is “On”, these messages will not be
received, regardless of whether the D1600 is playing,
recording, or stopped.
1 Connect the external MIDI device. (→p.73)
2 Make MIDI settings.
In the [SYSTEM] “MIDI” tab page, set “GlobalCh
”
to the channel of the external MIDI device that will
be transmitting the messages.
To transmit MIDI messages, turn the [SYSTEM]
“MIDI” tab page “ProgChange” “Trans” “On.”
To receive MIDI messages, turn the [SYSTEM]
“MIDI” tab page “ProgChange” “Recv” “On.”
3 In the [SCENE] “ReadDel” tab page, turn “Sce-
neRead” “Off.”
4 Transmit a program change from the external
MIDI device to recall a scene.
When the D1600 receives program change #0, it
will recall scene 001. Program changes #0–99 corre-
spond to scene 001–100.
Basic operation
Using the mixer