Filter
Top Products
85
2. SourceTrack............................. [1...16, 1–2...15–16]
Select the expansion/compression source track.
In the case of a 24 bit song, only tracks 7–8 can be
selected.
3. DestTrack................................. [1...16, 1–2...15–16]
Select the expansion/compression copy destination
track.
In the case of a 24 bit song, only tracks 7–8 can be
selected.
4. Times ...........................................................[1...99]
Specify the number of times that the data will be
copied.
5. Exec. (Execute).........................................................
Execute the track editing operation.
6. Wave ......................................................................
This displays the audio data of the track as a wave-
form. Here you can set the editing locations (IN,
OUT, TO) more precisely. (→p.82 EditType: “Copy-
Track”)
7. Mode ......................................................................
Select how the expansion/compression will be pro-
cessed.
This will appear when you press the “Mode” but-
ton.
7a. SelectExp/CompMode................ [Fast, Mid, Best]
Specify the conversion mode for expansion/com-
pression.
Fast: Processing speed will be given priority
Mid: Mid-way between “Fast” and “Best”
Best: Audio quality will be given priority
However if “SelectPitch” (7b) is set to “Variable,”
this setting will have no effect.
7b. SelectPitch ................................ [Fixed, Variable]
Select the pitch at which the data will play back
after expansion/compression has been performed.
Fixed: The pitch will remain the same
Variable: The pitch will be change
When you press the “OK” button, expansion/com-
pression will be executed with the conversion mode
that you selected. Press the “Cancel” button to can-
cel without executing.
EditType: “CopyWholeTrack”
This operation copies the track data from the beginning
to the end of the copy source track (“Sour
ceTrack”; the
currently selected virtual track) to the specified virtual
track of the copy destination track (“DestT
rack”).
When this is executed (“Exec.”), the copy destina-
tion track will be overwritten.
2. SourceTrack ............................................................
[1...16, 1–2...15–16, 1–4...13–16, 1–8, 9–16, 1–16]
Select the copy source track.
In the case of a 24 bit song, only tracks 1–8 can be
selected.
3. DestTrack................................................................
[1...16, 1–2...15–16, 1–4...13–16, 1–8, 9–16, 1–16]
Select the copy destination track.
In the case of a 24 bit song, only tracks 1–8 can be
selected.
4. DestVTrack......................................................[a...h]
Select the virtual track of the copy destination track
(“DestT
rack”) to which the data will be copied.
5. Exec. (Execute)........................................................
Execute the track editing operation.
EditType: “SwapWholeTrack”
This operation exchanges (swaps) the track data from
the beginning to the end of the swap source track
(“Sour
ceTrack”; the currently selected virtual track)
with the specified virtual track of the swap destination
track (“DestT
rack”).
Use this operation when you wish to reorder the
recorded tracks. When you have finished recording a
song, this operation also provides a useful way to move
the final data so that virtual track “a” is used for all
tracks.
When this is executed (“Exec.”), all data of the “Sour
ce-
Track” and “DestTrack” will be exchanged.
A B C ...
A B C ...A B C ...A B C ...
IN OUT
TO
SourceTrack
DestTrack
TIMES
7b7a
1
5
2
3 4
SourceTrack
DestVTrack (a...h)
1
5
2
3 4
SourceTrack
DestVTrack (a...h)
SourceTrack
DestVTrack (a...h)
Reference
TRACK