Lenovo 3109 Blu-ray Player User Manual


  Open as PDF
of 57
 
32
User Guide
Handling static-sensitive devices
Static electricity, although harmless to you, can seriously damage computer
components.
When replacing a part, do not open the anti-static packaging containing the new
part until the defective part has been removed from the computer and you are
ready to install the new part.
When handling parts and other computer components, the following precautions
should be taken in order to avoid static electricity damage:
• Limityourmovements,asmovementcancausethebuild-upofstaticelectricity.
• Alwayshandlepartsandothercomputercomponentswithcare,andhandle
adapters, memory modules, system boards, and microprocessors by their
edges. Never touch any exposed circuitry.
• Preventothersfromtouchingpartsandothercomputercomponents.
• Beforereplacinganewpart,rstplacetheanti-staticpackagingcontainingthe
part against a metal expansion slot cover or other unpainted metal surface on
the computer for at least two seconds. This will reduce static electricity in the
package and your body.
• Whenpossible,removethenewpartfromitsanti-staticpackagingandinstallit
directly into the computer without setting the part down. If this is not possible,
place the part on top of its anti-static packaging on a smooth, flat surface
before installing it.
• Donotplacepartsonthecomputercoverorothermetalsurface.
 previous next