Filter
Top Products
Installation
4
Basic connection
1. Connect the cables as necessary.
To connect an additional equipment,see the Connection of external equipment section.
2. Install the Cable management as shown.
Note: Here shown may be somewhat different from your set.
Connection of TV
1. Connect the aerial cable to the socket marked ANTENNA IN
on the back. For the best reception an outdoor aerial should
be used.
2. To connect an additional equipment, see the Connection of
external equipment section.
3. Connect the power cord.
Note: Here shown may be somewhat different from your set.
( )
The stand won't move if you
don't press release button.
Unfolding the stand base
1. Place the set with its front facing downward on a cushion or soft cloth.
2. Hold down the release button inside the stand and strongly pull out the stand with your two hands.
Note: Here shown may be somewhat different from your set.
Downloaded From TV-Manual.com Manuals