Filter
Top Products
206-4071
Each channel bank is capable of storing broadcast digital and analog channels
Figure 1. Typical channel banks after running Auto Tuning
B
A
N
K
1
2
3
4
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
Purpose
Channel Number
1 2 3 4 5 6 7 8 9 1011121314151617181920212223242
A = Active - - Channel was found during AUTO TUNING
Figure 2. Typical channel banks after running Auto Tuning, and customizing with Add/Del/Blnk
B
A
N
K
1
2
3
4
Basic
Extend
All CTV
Other
A
A
A
A
BC
BC
BC
BC
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
D
A
A
A
D
D
D
A
D
A
A
A
D
D
D
A
D
A
A
A
D
A
A
A
D
A
A
A
D
D
A
A
D
D
D
A
D
D
A
A
D
D
A
A
Purpose
Channel Number
1 2 3 4 5 6 7 8 9 1011121314151617181920212223242
A = Active Channel was found during AUTO TUNING
D = Delete Channel was deleted using Add/Del option.
BC = Blanked Channel Channel was blanked using BLANK channel option (ADD/DEL/BLNK).
5
5
Adding / Deleting / Blanking Channels
It is best to do ADD / DEL customizing before doing “BLANK.”
Auto Tuning (channel search) enters the same channel numbers
in channel banks 1, 2, 3 and 4. Auto Tuning removes any chan-
nels previously customized with ADD / DEL / BLANK. The chan-
nels found in the channel search on your antenna / cable will
be included, and any channels previously found but not current-
ly available will not be included. ADD and DEL (not BLANK) can
be used independently for channel banks 1, 2, 3 and 4. (If a
channel is not found in the channel search, it can be added see
the Channel Menu Manual Tuning option.)
Notes: A channel blanked, is blanked in all channel banks.
Selecting Deleted Channels
To tune to a Normal Delete channel: Select a Channel Bank
where the channel is added. Or, direct enter the channel num-
ber then go to the bank where the channel is set as ‘Normal
Delete’ and reconfigure the channel status.
Note: Ch Override must be set to 001 to allow access to the
channel scan.
Channel allocations in tuning bands:
• Broadcast and Broadcast Digital: 2 - 69
• CABLE - CATV, HRC or ICC: 1 - 125
Inactive TV Setup for Channel Bank 4
To create an inactive TV display on Channel Bank 4, select
Normal Delete for every channel in Bank 4. When Bank 4 is
selected with the bank button on installer remote, the Inactive
TV, call attendant will be shown on the TV screen. The TV will
turn itself off afterward. This will prompt the patient to arrange
for an available programming package on Banks 1, 2 or 3.
Channel Banks Setup
Use the Channel Banks to format the channel lineup programming package options for the end user
PAGE 26