Filter
Top Products
Owner’s Manual 21
Operation
- Choose preset labels for your channels.
- If a channel label is provided on the signal from the broadcasting station, the TV displays a short name for a DTV chan-
nel - even if you didn't preset a label for the channel.
1. Press the MENU button and then use
DD / EE
button to select the SETUP menu.
2. Press the GG button and then use
DD / EE
button to select Ch. Label.
3. Press the GG button. You will now see a screen filled with Labels and a preview screen.
4. Use the CH
DD / EE
button to select a channel to Label.
5. Use
DD / EE
/ FF / GG button to select the appropriate label for the channel, then press the ENTER button to set the Label
to the selected channel.
6. Press the EXIT button to return to TV viewing or press MENU button to return to the previous menu.
Channel Label Setup
Channel Label Setup
- Reveals how strong your DTV signal is and whether you need to adjust your antenna or digital cable input. The higher
the signal strength, the less likely you are to experience picture degradation.
- Digital DTV Signals: May not be available in all areas, nor are broadcast on
all programs.
1. Press the MENU button and then use
DD / EE
button to select the SETUP menu.
2. Press the GG button and then use
DD / EE
button to select DTV Signal.
3. View the on-screen signal strength monitor to see the quality of the signal
being received.
4. Press the EXIT button to return to TV viewing or press MENU button to return
to the previous menu.
DTV Signal Strength
DTV Signal Strength
- Change the picture source so you can watch your TV, cable TV, VCR, DVD, or any other devices that are connected to your TV.
1. Press the MENU button and then use
DD / EE
button to select the SETUP menu.
2. Press the GG button and then use
DD / EE
button to select Input Source.
3. Press the GG button and then use
DD / EE
button to select the source: DTV, Analog,
Video1, Video2, Component1, Component2, RGB-DTV (or RGB-PC), DVI-DTV
(or DVI-PC).
4. Press EXIT button to return to TV viewing or press MENU button to return to
the previous menu.
Note:
• To toggle RGB-DTV and RGB-PC, select RGB-DTV(or RGB-PC) and press
GG
button.
Input Source
Input Source