Filter
Top Products
37
Additional Information
OUT 2 jack (See “About AV
Separation Mode” (page 15).).
, The HDMI OUT jack is connected to a
DVI device. (DVI jacks do not accept
audio signals.)
, The device connected to the HDMI
OUT jack does not support the audio
format of the player. Check the audio
settings (page 31).
The HD Audio (Dolby Digital Plus,
Dolby TrueHD, DTS-HD High
Resolution Audio, and DTS-HD
Master Audio) is not output by
bitstream.
, Set [BD Audio MIX Setting] to [Off]
in the [Audio Settings] setup
(page 31).
, Check that the connected AV amplifier
(receiver) is compatible with each HD
Audio format.
The interactive audio is not output.
, Set [BD Audio MIX Setting] to [On] in
the [Audio Settings] setup (page 31).
The disc does not play.
, The disc is dirty or skewed.
, The disc is upside down. Insert the disc
with the playback side facing down.
, The disc has a format that cannot be
played back by this player (page 40).
, The player cannot play a recorded disc
that has not been correctly finalised.
, The region code on the BD or DVD
does not match the player.
The player does not detect a USB
device connected to the player.
, Make sure that the USB device is
securely connected to the USB jack.
, Check if the USB device or a cable is
damaged.
, Check if the USB device is on.
, If the USB device is connected via a
USB hub, connect the USB device
directly to the player.
The picture/sound is poor/certain
programmes display a loss of detail,
especially during fast-motion or dark
scenes.
, Picture/sound quality may be poor
depending on Internet content
providers.
, Picture/sound quality may be
improved by changing the connection
speed. We recommend a connection
speed of at least 2.5 Mbps for standard
definition video (10 Mbps for high
definition video).
, Not all videos will contain sound.
The picture is small.
, Press M to zoom in.
Disc
USB device
SEN (Sony Entertainment
Network)