Filter
Top Products
19 -
Setting the sound
Volume and other frequently used sound settings
Setting the volume
by using or OK, you can call other sound settings ...
and select using ...
use for the related selection/setting...
... and use to make the selection/setting there.
Sound adjustment allows you to adjust the sound characteristics to the station‘s
sound. The Sound effects settings allow you to expand a Dolby Pro Logic Signal to
a virtual surround signal by using “Dolby Virtual“; by using “Panorama“, you can
enhance the foundation of the stereo sound virtually for the loudspeakers.
Sound off/on
Sound off;
Sound on: Press button again or adjust volume.
Other sound settings:
Call the Sound menu
use to select the sound function to be set and use for
the related selection ...
and use to select/set.
Sound settings: Treble and bass. Different menu items are displayed depending on
the connected audio device (AURO, hi-fi amplifier). Under “more ...“ you will find
the sound selection for loudspeakers and headphones, auto volume, headphone
volume, AV audio signal, maximum volume and balance.
Picture settings
Open the TV menu
Select "Picture" with and selection with .
Use to mark image functions to be set.
Use for the related selection/setting...
... and use to set/select.
Picture settings: Picture adjustment, Contrast, Colour, Brightness and Sharpness.
Under “more ...“, you can find settings for Image+
✳
, Picture format, Move picture
up/down, Auto format, Film quality improvement DMM
✳
and DRM
✳
(Digital
Refresh Mode).
Direct control on TV set
On page 4, you can find illustrations of the control units located on the set.
Switching station on the TV set
Station up: with the button +
Station down: with the button –
Switching the radio on/off or switching over to the radio
Press R to switch the radio on or off.
Additional functions via the menu
In the radio or TV operating modes, you can make settings for Volume, Brightness,
Contrast, Picture format and Stations. “Service“ is intended for the customer
service department.
use M to call the menu
use – or + to select the function to be set
use R for the related setting/selection
use – or + to set/select.
Use M to move one level up; you can use – or + to select other functions.
Daily operation
Volume ...
24
normal
Loudness
Sound adjustment
Sound effects
V
o
V
olume
Pop
Classic
Sound adjustment
Speech
no
r
n
ormal
Sound off
Sound on
INFO
END
more ...
Sound
Bass
Treble
4
INFO
END
Sound
Bass
6
Picture adjustment ...
INFO
END
Settings
Connections
Recording
Sound
TV menu
Picture
INFO
END
Colour
6
Picture
TV menu
Operating mode Contrast Picture f
o
Direct control on TV set
TV
Volume Brightness
Volume
g
mode ContrastBrightness Picture format Sta
t
Direct control on TV set
24
Volume
Direct control on TV set
18
Sound adjustment
Volume
Sound effects
Loudness
24
)
(
)
(
)
(
(
(
)
)